Get the awesome Full-Drive sound of the '90s in a new package.
The Fulltone Full-Drive 2 has always been a Tube-Screamer killer, plain and simple. The original Full-Drive 2’s footswitchable Boost Mode was smart, but simply a way to switch between two different distortion settings on the fly. Although it worked nicely, it did not allow you a separate Volume level for each mode, making it a challenge to balance the two modes.
Enter the Full-Drive 2 V2
-Not only does V2 have a separate volume control for Drive 2 channel, it has a ton of clipping Modes including:
-Comp-Cut (CC), the warmer '90s version, which is anything-but transparent, and pummels your amp’s input.
-Vintage Mode (VIN) with its slightly asymmetrical, fat, warm sound.
-Flat-Mids (FM), the warmer, fatter FM from the late '90s/early 2000s.
-WIDE mode, more open, more bottom-end, more clarity.
Half-Clipped (HC) mode, where the bass notes are less distorted and the higher notes sing for days.
Features include a JRC4558 opamp, full-size audiophile-grade capacitors, internal battery cradle, 9-18VDC operation, a tiny bullet-proof steel enclosure, top-mounted jacks, and True-Bypass using our own Fulltone 3PDT footswitch.
This is the one pedal you could take to any session or gig and have every sound you’d need at your disposal.
Dimensions: 4.45"W x 4.2"D x 2.5"H
16 gauge cold rolled steel enclosure.
Based around the desirable JRC4558 chip and 1990’s Full-Drive circuit, with 2 toggle switches for many more sonic options.
30% smaller than the FD2-MOS, 15% smaller than the FD3 at only 4.45" wide x 4" deep.
2 Footswitches:
Left ON/OFF footswitch: True-Bypass switching with exclusive Fulltone “Anti-Pop” circuit.
Right “Channel select” footswitch: switches between Overdrive 1 or Overdrive 2, each with individually adjustable Volume and Drive knobs.
100% Built in the USA.
16 gauge cold rolled steel chassis with easy battery access via 2 thumbscrews.
9-18VDC operation, extremely green circuit only pulling 10mA of current.
2 toggle switches to access the many clipping options
LEFT 3-position switch:
Comp-Cut- removes clipping diodes, not a clean boost because it can distort the opamp.
Flat Mids- a late 1990’s Fulltone invention that feeds signal back on to the clipping diodes removing the Mid-hump.
Vintage- traditional 90's Full-Drive slightly asymmetrical clipping.
RIGHT 3-position switch
Wide- combines Mosfets & Schottky Diodes for more clarity, less compression, a more D*mble-like sound.
Standard- traditional 90's FD2 slightly asymmetrical.
Half-Clipped- another Fulltone exclusive, only clips the top waveform for extreme clarity, feel, and touch like you've never experienced!