The Maiden V2 features controls for Volume, Master, Treble, Middle, Bass and EQ Lift, as well as a 3-way bright switch, a mid boost switch and an EQ Lift Boost footswitch.

New V2 Features include:

A second footswitch is incuded in the same size enclosure, giving the option of accessing two features of the circuit by footswitch:

- EQ Lift Boost. Lifting the EQ results in a large volume boost and a general fattening of the tone. The amount of volume lift and tone fattening is set by the EQ Lift pot. This feature was available on the V1, but only with the addition of the external EQ Lift Boost pedal (sold separatley).

- Mid Boost. On the V1 Maiden the mid boost was activated with a push-pull pot switch. On the V2 this is replaced with a 3-way mini switch. In position 1 the mid boost is off. In position 2 the mid boost becomes footswitchable with the second footswitch. In position 3 the mid boost is on (regardless of the second footswitch status).

This second footswitch can be used to select either the Mid Boost or the EQ Lift Boost or it can access both features at once. If the user wants to use the footswitch for Mid Boost only, set the Mid Boost mini switch to position 2 and turn the EQ Lift pot to zero. To access the EQ Lift Boost alone (with the mid boost turned off), set the Mid Boost mini switch to position 1 and turn the EQ Lift pot to the desired boost amount. To access both the EQ Lift with the Mid Boost already on, set the Mid Boost mini switch to position 3. To access the Mid Boost and EQ Lift at the same time, set the Mid Boost mini switch to position 2 and set the EQ Lift pot to the desired boost amount.

Measurements: 3 7/8” wide x 4 ¾” deep x 2.56" tall

Power requirements: 9VDC @ 500mA, center negative, 2.1mm jack

Weight: 1.27 lbs (575g)