TWO CHANNELS. INFINITE TONES.

The Britain 4.0 features two totally separate channels, each with its own set of dedicated tone controls. While two channel amps have been available for any years, the magic of the Britain lies in its ability to blend those two channels together to create an infinite number of tonal options!

Channel 1 is the exact same EF86 based preamp that was featured in the original Britain but has been updated with our own footswitch-able boost circuit that true bypasses the Treble and Bass controls resulting in a substantial boost in volume, gain and tonal purity. Channel 1, being the higher gain of the two, is considered the dirty channel of the amp and offers a very broad frequency response that works to deliver your instruments true voice with minimal coloring or artifacts.

Channel 2 of the Britain 4.0 is a 12AX7 based “Top-Boost” preamp that balances perfectly against Channel 1 by providing pristine clean tones incredible headroom and articulation. This channel, which was designed to remain clean longer than Channel 1, embodies the very definition of clean British guitar tone but is enhanced with increased richness and depth.

Channels 1 and 2 are internally linked so that the use of the input labeled “1/2” sends the guitars signal to both channels equally. In this arrangement, each channel is active along with its associated tone controls and blending of the two channels is a simple as adjusting the Volume control for each channel. The true advantage of this type of arrangement lies in the ability to blend Channels 1 and 2 together while still allowing tonal shaping of each channel via their respective Treble and Bass controls.

Plugging into the input labeled “2” breaks the internal connection to Channels 1 and 2 thereby allowing them to function independently. This feature allows the musician to use a completely different signal chain (floor based effects etc.) for each channel if desired, and is fully expanded by the use of an ABY box to select channels 1, 2 or both.

With all of these tonal options available, the Britain 4.0 truly delivers Two Channels, Infinite Tones.

Channel 1: EF86 Preamp with Volume Treble and Bass Controls.
15/30W Class A, 25W Class A and 50W Class A/B Rotary Switch on back panel.
Channel 2: 12AX7 “Top Boost” Preamp with Volume Treble and Bass Controls.
Power and Standby Switches on back panel.
EL84 Power Tubes provide 15/30W of Power in Class A modes. EL34 Power Tubes provide 25W of Power in Class A mode and 50W of Power in Class A/B mode.
External Locking Bias Trimmer and Test Points on back panel.
Boost Footswitch for Channel 1 that disables the Treble and Bass controls and provides gain and volume boost and front panel LED indication.
Power Entry Module that allows switchable 120/240VAC operation.
Series FX Loop for Channel 1 and Channel 2.
Mains and B Fuses on back panel.
8-16 Ohm Speaker Impedance Selector Switch
Dual Speaker Jacks on back panel.

Musicians on RigShare