ATC Loudspeakers
ATC Loudspeakers

P1 Pro Amplifier

ATC Loudspeakers P1 Pro Amplifier on RigShare
The ATC P1 Pro is a high-quality class A/B power amplifier designed to power ATC passive monitors. The ATC P1 Pro features 150W per channel with a true dual mono design with the power supply signal being totally separated from the return paths ensuring minimum crosstalk and maximum separation. Another advantage of such a design is that intermodulation between channels is reduced to the minimum at all frequencies and that power on one channel doesnt affect the other. With balanced XLR inputs and unbalanced RCA inputs ensures that the ATC P1 Pro fits perfectly in your system. In addition, each channel features two phono input sockets and a "Link" input phono for connecting two amps together when using a sub for example. Outputs are proprietary ATC connectors with red and black terminals to ensure correct connections. The P1 Pro fits into a 19" rack and includes a remote trigger for send the unit in standby. Several LEDS indicate the different status of the amp with a green light indicating that the amplifier is active and a red light indicating standby mode. Additional LEDs include "Clip", "Error Left" and "Error Right" are added as indication of the incoming levels. A Protect mode is also included whereby the amplifier will shut down. This feature is designed to protect the amp and the monitors.

Price

$3,150.00


What Musicians are Saying

One-liners are short gear reviews by the RigShare community.

Let us know what you think!

Write the first one-liner about the ATC Loudspeakers P1 Pro Amplifier

sponsored
Buy and Sell at Reverb

Similar Gear

ADAM Audio A7X - Single on RigShare
ADAM Audio
ADAM Audio

A7X - Single

The predecessor to the Adam A7X, the A7, became the most famous of all ADAM monitors in a very short time. Not only has it been reviewed over three dozen times with outstanding results, it has also received numerous awards. The A7 quickly gained mass appeal, praised in many of the world's largest internet forums. Still today, the A7 are the reference monitors in many smaller studios. With the A7X, ADAM Audio proudly presents the evolution of a legend. It takes everything that made the A7 such an outstanding speaker to a new level. Driver technology The first aspect that distiguishes the old from the new model is the X-ART tweeter. The €˜X' stands for €˜eXtended frequency response' and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has a higher efficiency and higher maximum sound pressure levels. The perfect integration with the lower frequencies has been achieved with a newly designed 7" midwoofer. It has been redesigned with a much bigger voice coil (1.5") and is driven by an amplifier with twice the power compared to its predecessor. This combination produces an amazing sound and pressure levels with an almost distortion-free musical reproduction. Amplifiers / controls Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the midwoofer is being driven by a 100W PWM amp. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch. On the rear panel are several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies. To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.