ATC Loudspeakers
ATC Loudspeakers

SCM1-15ASL - Single

ATC Loudspeakers SCM1-15ASL - Single on RigShare
The ATC SCM0.1/15ASL Sub uses the incredible ATC invention, the SL driver. 375mm (15") in diameter, it is the largest of the SL driver options and offers the lowest 3rd harmonic distortion of any large woofer we know, typically reducing it by 35dB. A massive built-in 1000W ATC high speed amplifier delivers over 118dB spl at 28Hz, an amazing feat. This sub is floor loaded to couple with almost any room properly (far better than any front loaded type sub). It also offers a nice user interface that addresses Billy Woodmans philosophy of "no bass management". The ATC sub has a dual XLR (L/R) input, an amp gain control, a LP filter with user selectable frequencies of 2K, 180Hz, 120, 90, 70, 50Hz. There is also a "contour" control that enables a peak type filter (boost) into the amplifier at around 100Hz if you want to compensate for AC3 or source deficiencies. ATC recommends no "bass management" or, no roll off for the main speakers when used with a sub. This bass management filtering artificially colors the main speaker sound and introduces filter/phase problems. ATCs thought is that bass management was largely created to protect woofers in tiny satellites, not to improve overall response or transition between sub and mains. Run the main speakers full range and the sub at the widest possible bandwidth, then lower the LP filter freq to the sub from there. This generates a nice result and creates a smooth transition between mains and subs. The ATC sub package is flat to 28Hz and is very clean. True low distortion woofer output below 100Hz is a thing of beauty and weve heard it ONLY in the ATC. Do not expect to be "knocked down" with huge quantities of bass. Much of what we think is massive bass is really just loads of distortion at 200Hz to 300Hz! Sometimes this distortion can approach 40 to 50% of the total sub output! So word to the wise, do not buy this ATC sub for showing off to clients. It is a precision tool and engineers window into the "below 100 Hz" world of a mix; a near perfect mate to ATC mains. If you are making judgments on bass content we see no other way you can to do it properly than with the ATC sub. A single ATC SCM 0.1/15ASL will deliver output SPL of 118dB (1W/1M). If you need more output you must add units. A single 1-15 sub is 118dB SPL, 2 is 121dB SPL, 4 is 124dB SPL and 8 is insane!

Price

$7,990.00


What Musicians are Saying

One-liners are short gear reviews by the RigShare community.

Let us know what you think!

Write the first one-liner about the ATC Loudspeakers SCM1-15ASL - Single

sponsored
Buy and Sell at Reverb

Similar Gear

ADAM Audio A7X - Single on RigShare
ADAM Audio
ADAM Audio

A7X - Single

The predecessor to the Adam A7X, the A7, became the most famous of all ADAM monitors in a very short time. Not only has it been reviewed over three dozen times with outstanding results, it has also received numerous awards. The A7 quickly gained mass appeal, praised in many of the world's largest internet forums. Still today, the A7 are the reference monitors in many smaller studios. With the A7X, ADAM Audio proudly presents the evolution of a legend. It takes everything that made the A7 such an outstanding speaker to a new level. Driver technology The first aspect that distiguishes the old from the new model is the X-ART tweeter. The €˜X' stands for €˜eXtended frequency response' and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has a higher efficiency and higher maximum sound pressure levels. The perfect integration with the lower frequencies has been achieved with a newly designed 7" midwoofer. It has been redesigned with a much bigger voice coil (1.5") and is driven by an amplifier with twice the power compared to its predecessor. This combination produces an amazing sound and pressure levels with an almost distortion-free musical reproduction. Amplifiers / controls Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the midwoofer is being driven by a 100W PWM amp. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch. On the rear panel are several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies. To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.