Can't find the gear your looking for?
Send us a suggestion and we'll let you know when we add your gear to our database
Bodyrez Acoustic Pickup Enhancer
Ultra-Compact Acoustic Guitar Pedal for Acoustic Pickup Enhancement with Studio-Quality Tone and Feedback Suppression
4 Rigs
V4 The Countess Preamp Pedal
The Victory V4 Countess Preamp Pedal is an all new creation, loaded with 4 valves and running an all-valve signal path. Each pedal in the V4 series can be run just like a normal pedal in "standalone mode," but where they really shine is in place of your current amp's preamp section. In "amp through mode", the pedal is routed directly to your amp's power section, breathing a completely different vibe into your amp. The Countess was developed alongside Guthrie Govan and based on the V30 amps, with expansive clean and overdrive capabilities. Bring different Victory voices to your Victory amp or add 2 switchable modes of their legendary tone to any other setup. The V4 Preamp pedals are an incredible tool for people who like to record direct, as well as lightening up your load while traveling and simplifying backline situations.
3 Rigs
The Clover
In early 1984 BOSS released two strange new devices under the name “The Pocket Series”. One of those devices was the FA-1 FET Preamp and it quickly found its rightful place among the legends of tone when The Edge of U2 used it on the recording of “Unforgettable Fire” as well as placing it in his following touring rigs. The Clover Preamp/Boost is our faithful interpretation of the FA-1 but with several additional features that we believe make this amazing circuit even better. You won’t want to be without your lucky tone-shaper at any gig! The Clover has four standard controls and one rotary switch on the top. The Volume control allows you to set your volume at unity or as a boost to push your amp or dirt pedals. There are three EQ controls to give you tons of control to cut or boost Bass, Mids, and Treble. The rotary switch has three settings: Full EQ, No Mid, and No EQ. When set to Full EQ all three EQ controls are in operation, giving you full control over the full range of EQ available. The No Mid setting is an exact replica of the original FA-1, removing the ability to control the Mids and leaving them in a fixed setting. When in the No EQ mode all the EQ settings are removed and the Clover becomes a straight FET boost, perfect for pushing an amp. On the right side of the pedal there is a Low Cut dip switch. This removes some of the lows if you feel your tone is too muddy and can help you cut through a mix. In addition to the standard 1/4” input and output, the Clover has an XLR output for using as an acoustic or bass preamp. These can be used individually or simultaneously if you want to go to a sound board or interface as well as an amplifier. The XLR output was designed with acoustic and bass players in mind as the Clover is a wonderful preamp that gives you a great amount of control over your sound. There is also a ground lift if you experience some hum when using the XLR output. The Clover is an end all preamplifier / boost circuit for any electric, acoustic, or bass player. The EQ is simple, powerful and doesn’t allow a bad sound. No matter what style of music you play or amp that you use, the Clover will prove to be an indispensable tool. While the Clover excels at being a preamp / boost for dirt pedals, the magic is in pushing your tube amplifier into natural overdrive. The EQ lets you hit the exact spot that your amp is naturally prone to give in at. Push your small wattage amp into natural rich overdrive and distortion or find sounds in your larger more powerful wattage amp that you have never heard before. Strat and Tele players can use the Clover to create extra punch, depth and dynamics that single coil pickups can’t normally achieve, while Les Paul and humbucker players can find clarity, bite and definition galore! From country, rock, metal and even acoustic… The Clover covers every base. Find your unforgettable tone with the luck of the Clover!
BB PLUS
A pre-amplifier, so transparent and versatile it bridges the gap between fingertips, guitar and amplifier with a full spectrum of sounds. Channel A epitomizes the core of the original BB Preamp. It has an amp-like feel. Characteristics that are very open with rich complex harmonics. Channel B is the most versatile booster we have ever designed. At any setting, it delivers the most inspiring musical tone that only dreams are made of. Activate both channel stacks with a single button for unlimited configurations of superb tone. True bypass for eliminating any signal interference when switched off. Can be used with AC adaptor (optional) or 9V Battery. Dimensions (W/D/H): 4.62" x 3.65" x 2" (117mm X 93mm X 50mm) Weight: 0.9 lbs. (0.4kg) True Bypass Switching INPUT Jack,OUTPUT Jack, J AC Adapter Jack (DC 9V) Input Impedance: 1M ohm (min) Output Impedance: 1k ohm
Alpha · Omega
Besides being an amazing composer, producer and bassist, Jon Stockman is amazing at crafting some of the most devastating bass tones in the world. We got together in our then Helsinki headquarters 18 months ago and after endless tweaking and tens of prototypes we are finally ready to announce our first co-designed creation: Alpha · Omega. This creation differs greatly from our previous preamplifiers and overdrives: it is fully operational amplifier based and has two distinct distortion circuits (Alpha and Omega) which can be selected or blended using our Mod knob. This unusual control, in conjunction with the toggle switches and 3 active band equilizer makes Alpha · Omega the most flexible among our designs.
Broadcast
The Broadcast is a transformer coupled, discrete Class-A germanium pre-amplifier based on the classic broadcast consoles of the 1960s. In the low-gain setting, the Broadcast can cover everything from sparkling clean boost through to transparent overdrive, all with a healthy dose of volume available to push your amp. The Broadcast features a specially selected Triad steel-core transformer and a NOS germanium transistor. Advancing the gain on the Broadcast starts to saturate the transformer and the pedal’s discrete circuitry, giving rise to a gentle and dynamic compression coupled with subtle thickening of the mid-range. With the gain switch in the high setting and the trim control wound up, the Broadcast starts to deliver heavier distorted sounds with a warm and fuzzy edge to them. The Broadcast covers a wide range of driven and distorted tones whilst remaining dynamic, responding well to pick attack and the subtle nuances of every player.
LPB-1 Linear Power Booster Preamp
An exact recreation of the original LPB-1 circuit that ushered in the age of overdrive in 1968. Put the LPB-1 in line with any effect to provide boost and definition. Improve the gain and saturation of your amp.
Simplifier
The Simplifier features a 100% true analog preamp that recreates with obsessive detail the most useful and popular clean channel preamps in the market. The genuine passive preamp tone stack is a key part of a tube amp sound and response is the tone stack behavior. The tone stack on the Simplifier is a genuine configurable three band classic amplifier topology, keeping the same feel, response and interaction of the original amp. The Power Amp Sim is an accurate approximation of the interaction between the power tubes, output transformer and global feedback, which produces a particular frequency response for different tubes and speakers. The Tweakable Cabinet simulator takes the heritage and experience of DSM Noisemaker developing the most useful and innovative cabsims of the market.You can easily dial two independent cabinet simulators panned Left - Right with Mic Position controls that responds as a real center/off axis microphone position adjusting the precise amount of high-end roll off you look for. A three way toggle switch allows you to choose independent cabinet style for each side. Pick from a 1x12 Combo,2x12 or 4x12 cabinet simulations that you can combine with any of the 3 preamps, adding an extra dimension to your sound development. The Spread Control feature allows you to create a pseudo stereo imaging, by shifting the phase of one channel on selected key frequencies. It will make your sound bigger and 3 dimensional, even if you are using a mono configuration. This spread is useful to get that "dual Cab" sound with realistic physical separation, very useful for recording on a stereo track, or playing with headphones.
Platinum Pro EQ/DI Analog Preamp
Completely redesigned from the ground up, the all-analog Platinum Pro EQ universal instrument preamp delivers incredibly accurate sonic detail for any acoustic instrument. A discrete, high-headroom Class-A preamp uses precision, high-speed circuitry for the highest fidelity and low distortion. Classic Fishman tone centers with sweepable mid is combined with a switchable guitar/bass EQ mode, making it more musical for bass instruments and more universal for recording and performing musicians. The new Platinum Pro EQ integrates critical performance features like adjustable volume boost and a balanced XLR D.I. output housed in a beautiful, road-ready design. The Platinum Pro EQ is built to be stomped on with durable foot switches that activate the adjustable volume boost or high-contrast chromatic tuner. It also includes a simple and effective analog soft-knee compressor, effects loop and precision sweepable notch filter.
1 Rig
Analogizer
Got the digital blues? Coat your guitar in warm, organic tone. The new Analogizer thaws out digitally processed guitar, and gives you that analog sound and feel. Boost your solos with up to 26dB of gain. Fatten your sound. The Analogizer is perfect for warming up the harshness of your digitally processed guitar or for thickening up your already warm sound.
2 Rigs
Aura® Spectrum DI Preamp
The complete performance technology solution for acoustic musicians. The Aura Spectrum DI features award-winning Aura Acoustic Imaging technology that enables players to mix studio-mic’d sound with the signal from their undersaddle or soundhole pickup. Housed in a professional quality all-metal case, the Aura Spectrum DI features a 3-band EQ, one-knob compressor, automatic feedback suppression with up to 3 notches, a chromatic tuner, effects loop, plus a high-quality balanced XLR D.I. The included Aura Image Gallery software provides access to an ever-expanding list of instrument Images recorded using our collection of the most sought after microphones. Aura Spectrum DI is not only incredibly versatile, but it also delivers the most realistic acoustic sound available for stage or studio. Fishman’s Aura Image Gallery software allows users to access Images for hundreds of guitar makes and models through our free Aura Image library. Once installed on your PC or Mac, the software also allows Aura Images to be sorted, managed and grouped. Users can then take advantage of the preamp’s open architecture by loading Aura Images via a USB cable.
Axe FX II Preamp/Effects Processor
A complete rackmounted system for guitar amplification modeling and effects, the Fractal Audio Axe FX II improves on the acclaimed original by providing even better sound, more presets and more flexibility than ever. Two state-of-the-art Analog Devices TigerSHARC DSPs are onboard, one dedicated solely to amp modeling, the other for effects. Every nuance of the gear modeled is painstakingly maintained, which is why the Fractal Axe FX II is one of the most popular and award winning pieces of modeling gear in guitar history.
Noble Preamp DI
When you're playing Bass guitar you want to use tubes to get the best sound possible. Especially when you are playing your instrument directly into a mixer or audio interface. The beauty about tubes is that they distort gradually with low-order harmonics, which are perfect musical intervals. The second harmonic is an octave, the third harmonic is a fifth above the octave, the fourth harmonic is a second octave, etc. This is the reason tubes sound so good, and you will notice it. Their subtle distortion provides the natural harmonics lacking in electronic instruments, and restores the dimension and feel of your bass as it was intended to be heard.
V4 The Sheriff Preamp Pedal
The Victory V4 The Sheriff Preamp Pedal is an all new creation, loaded with 4 valves and running an all-valve signal path. Each pedal in the V4 series can be run just like a normal pedal in "standalone mode", but where they really shine is in place of your current amp's preamp section. In "amp through mode", the pedal is routed directly to your amp's power section, breathing a completely different vibe into your amp. The Sheriff is based on the Sheriff 22 & 44 amps, with tons of classic rock and modded "plexi" tones. Bring different Victory voices to your Victory amp or add 2 switchable modes of their legendary tone to any other setup. The V4 Preamp pedals are an incredible tool for people who like to record direct, as well as lightening up your load while traveling and simplifying backline situations.
Preserver Preamp-Overdrive
The "Preserver" is an extremely transparent PreAmp that "preserves" your tone giving you the most outstanding headroom you can get in a stompbox. You also get 2 extra overdrive modes with independent clipping stages featuring a LED overdriven section and a more compressed silicon gain stage. You can choose the wood on the top with beautiful and unique presentation.
