MXL Microphones
MXL Microphones

4000 Blizzard Limited Edition

Rig

1

MXL Microphones 4000 Blizzard Limited Edition on RigShare
The MXL 4000 Multi-Pattern is a condenser microphone designed around a Class-A discrete FET mic amp specially chosen to match its large diaphragm capsule. This one is a reissue with a white chassis and a blue LED that glows when phantom power is present. The capsule itself has been sized and tuned to provide a silky and airy top end with a full, warm midrange reminiscent of vintage microphones. Hand selected internal components create a sound that enhances both vocal and instrument performances. Using the Polar Patterns To take advantage of the versatility of the MXL 4000's polar patterns, here are some miking tricks of the pros. Figure-8 Figure-8 mics pick up sound equally well from front and rear. So, if you're looking for a rich vocal sound with the added ambience of room tone to add depth and spaciousness, use the figure-8 pattern and have your vocalist sing into one side while the other picks up the reflections of the room. Only do this if you have a good-sounding room. You can also use the figure-8 pattern for isolation from other instruments. For example, if you're miking drums and want to give the hi-hat its own track, position the MXL 4000 so that the side of the figure-8, where rejection is greatest, is pointing towards the snare while the front or rear of the mix faces the hat. Do the same if you're recording a singer-guitarist who's playing an acoustic while singing. You need two figure-8 mics for this one. Position the vocal mic so that the side is facing the guitar, and the guitar mic so that the side of the figure-8 points towards the singer's mouth. Now both singer and guitar are isolated. Again, make sure you do this in a room that sounds good, because the back side of the mic will be picking up the room. Omni In many cases, the least used, but best-sounding of all the polar patterns. Omni has very little off-axis coloration, which means that sounds entering the sides of the mic sound just as good as sounds entering the front. If you have a great-sounding room, by all means, try omni before anything else. Omni gives your recordings the impression of being in the room with the sound. It also works very well as the "mid" mic in Mid-Side stereo recording. Cardioid This is the most used pattern. It's basically point and shoot, but keep in mind that you can use its rear-rejection to your advantage, or by turning the mic slightly away from the source, you can use it's off-axis response to tame sharp transients. Aside from straight-ahead recording, most people us the cardioid pattern is the "mid" mic in Mid-Side stereo recording. Requires phantom power.

Musicians Using the 4000 Blizzard Limited Edition

Jesse Flores
View All

What Musicians are Saying

One-liners are short gear reviews by the RigShare community.

Let us know what you think!

Write the first one-liner about the MXL Microphones 4000 Blizzard Limited Edition

sponsored
Buy and Sell at Reverb

Similar Gear

Sennheiser EM 100 G4 on RigShare
Sennheiser
Sennheiser

EM 100 G4

True diversity half-rack receiver in a full-metal housing with intuitive LCD display for full control with evolution wireless G4 100 Series systems.

Sennheiser SKM 100 G4 on RigShare
Sennheiser
Sennheiser

SKM 100 G4

Powerful handheld transmitter with a lightweight aluminum housing for evolution wireless G4 100 Series systems.

Sennheiser SK 100 G4 on RigShare
Sennheiser
Sennheiser

SK 100 G4

Robust bodypack transmitter for daily use on stage with evolution wireless G4 100 G4 systems.

Sterling Audio ST170 on RigShare
Sterling Audio
Sterling Audio

ST170

The Sterling ST170 Active Ribbon Microphone brings a highly detailed, vintage-style tone to any recording environment with an ideal voicing for electric and acoustic guitars, drums, vocals and overhead/room. The active phantom powered design gives you the optimal output level to hit the tonal sweet spot of mic preamps, as well as ample ability to handle extra loud sources like guitar amps and drums. Its rich presence and warm bottom allow your mixes to come together quickly without heavy EQ. Includes SM5 metal shock mount and sturdy aluminum carry case. Requires phantom power.

Sterling Audio ST59 on RigShare
Sterling Audio
Sterling Audio

ST59

The Sterling ST59 multi-pattern professional recording microphone raises the standard for acoustic capture of vocals and instruments. Based on an ultra-thin 3-micron gold evaporated Mylar® diaphragm, the ST59 also features a Disk ResonatorTM that naturally extends high frequency response. Combined with Class-A FET circuitry, the Sterling ST59 provides incredible smoothness, detail and articulation for a wide variety of recordings.

Sterling Audio ST77 on RigShare
Sterling Audio
Sterling Audio

ST77

Certain vintage and modern German mics are lusted after for their ability to produce full-bodied vocals with a unique sheen that has come to be known as "air." Of course they also come with a throat-clogging price tag (and that's just the modern ones, vintage market prices bring you closer to cardiac arrest). However, Sterling Audio has found a way to bring you that vintage FET sound without the mind-numbing price tag ” the Sterling ST77 large-diaphragm condenser. Sterling designed the ST77 condenser mic around a Class-A discrete FET mic amp specially chosen to match its cardioid, large diaphragm capsule. The capsule itself has been sized and tuned to provide a silky and airy top end with a full, warm mid-range reminiscent of vintage microphones. Hand-selected internal components create a sound that flatters vocals and instruments. Requires phantom power.

Zvex Pedals TB-1 Tea Ball Microphone on RigShare
Zvex Pedals
Zvex Pedals

TB-1 Tea Ball Microphone

Introducing the model TB-1 Tea Ball Microphone by ZVEX Effects, designed for specialty use on stage and in the studio. The special circuitry of the TB-1 causes it to reject sound from sources that are further than an inch or so away from the grille. This allows the mic to be placed on stage in a loud environment and plugged directly into a guitar amp that's turned up to a level that would cause any normal microphone to squeal furiously. In the studio when recording a guide vocal track in a live recording room, the TB-1 will reject the amplifiers and drums. This way the guide vocal can be used for rough mixes without fear of hearing other instruments or room ambience loudly in the background. Why is it called the Tea Ball Microphone? It's actually built inside a stainless steel tea ball, the kind of device used to make a hot mug of goodness from a tin of loose tea. The clip that holds the tea ball shut is used to open it up to change two CR2032 batteries. These have a life of about 100 hours and presently cost less than $10 for 20 units on Amazon (Sony CR2032). The mesh on the tea ball will never chip your teeth like an SM58 because it's quite springy. That's important because the best sound from this mic comes from putting your mouth right up against it. The entire mic disassembles easily by unplugging the electronics and lifting out the internal foam windscreen which can be washed in soapy water. Be sure to dry it before reassembling. The mesh ball is suspended inside a thick copper hoop using three springs for a look like something from the early part of last century. The TB-1's output level is similar to that of a guitar. It has a 1/4" female jack that runs smoothly parallel to the microphone stand. The mic is powered up by being plugged in and turned on with a switch on the back. When the mic is unplugged, the battery will not drain no matter which position the power switch is in. When the mic is live, an LED gently glows near the switch, visible from FOH so that the sound engineer can be sure it's working. Enjoy!

Audix Microphones SCX1 Drum Microphone on RigShare
Audix Microphones
Audix Microphones

SCX1 Drum Microphone

The SCX1 is a professional studio cardioid condenser microphone designed for a wide variety of recording, broadcast and live sound applications. Known for its high sensitivity, pin-point accuracy, low profile and consistency, the SCX1 is also available with hypercardioid (model SCX1HC) or omni-directional (model SCX1O) capsules.With a smooth uniform frequency response from 40 Hz - 20 kHz, the SCX1 is very consistent when responding to on and off-axis signals, and exhibits excellent phase coherence and minimal proximity effect. The SCX1 is characterized with a wide cardioid polar pattern; this, coupled with the high output and sensitivity of the microphone, makes the SCX1 an ideal choice for miking overhead, drums, instruments, room ambience, orchestral sections, stringed instruments, piano, vibes and sound effects. The SCX1HC condenser microphone is a number one choice for miking hi-hat both live and in the studio.Other features include a 21 mm gold vapor capsule, miniaturized electronics and an extremely small footprint. The SCX1 will handle sound pressure levels of 130 dB and will provide up to 20 dB of ambient noise rejection. In addition to acoustic instruments, the SCX1 is an excellent choice for group vocals, speech or Foley work. The SCX1HC has become a popular choice for interior dialogue boom pole miking. It has a precision machined brass body, interchangeable capsules, black multi-layer class ‘A' liquid finish and gold plated XLR connector. The SCX1 studio condenser microphone is manufactured to exacting standards and tight tolerances.