Disaster Area Designs
Disaster Area Designs

DMC-3 Generation 2

Rigs

4

Disaster Area Designs DMC-3 Generation 2 on RigShare
The DMC controllers require a power supply to operate. The pedal uses a standard 9V power supply with a 2.1mm pin, center negative. The controller requires 24mA maximum, and may be powered by most power supplies including the Voodoo Labs Pedal Power 2+, Visual Sound 1SPOT, and others. The DMC controller communicates with your other pedals using a MIDI cable. The type and brand of cable is not critical – we use HOSA cables at the factory for testing. The USB port on the DMC controller is used for firmware updates with the Disaster Uploader application. It is not used during normal operation. When the USB connection is in use, the DMC controller is powered by the USB connection. The MIDI and power cables may safely be disconnected during firmware updates. For more info regarding firmware updates, please read the .PDF file included in the Disaster Uploader application.

Musicians Using the DMC-3 Generation 2

View All

What Musicians are Saying

One-liners are short gear reviews by the RigShare community.

Let us know what you think!

Write the first one-liner about the Disaster Area Designs DMC-3 Generation 2

sponsored
Buy and Sell at Reverb

Similar Gear

Disaster Area Designs DPC-8EZ Gen3 on RigShare
Disaster Area Designs
Disaster Area Designs

DPC-8EZ Gen3

A bypass looper can streamline your rig in ways you never thought possible – imagine being able to tap one footswitch to go from verse to chorus to bridge of a song, while changing up to eight different effects plus two MIDI devices! If you already have a MIDI controller, the DPC-8EZ can act as a MIDI “slave” on any available channel. You can even connect two or more DPC-8EZ to control more pedals. The DPC-8EZ is fully compatible with the Disaster Area Gen3 pedal controllers – connect it to a

Disaster Area Designs DPC-5 Gen3 on RigShare
Disaster Area Designs
Disaster Area Designs

DPC-5 Gen3

What does it do? The DPC-5 is a compact MIDI controller and loop switcher. It’s designed to control a mix of MIDI and non-MIDI pedals in your rig, allowing you to craft presets that you can engage instantly when you need them. A single tap on your DPC-5 can turn up to five non-MIDI pedals on or off, send tap tempo to a delay or other device, change the channel on your amplifier, and switch programs on up to four MIDI devices. That’s a lot of power in a small footprint!

RJM Music Technology Mastermind PBC on RigShare
RJM Music Technology
RJM Music Technology

Mastermind PBC

The Mastermind PBC is our first switching unit designed for use on a pedalboard. This product combines best of all of the products we’ve done over the years into one compact and powerful unit. This gives for the first time, the power and flexibility of a rack switching system – on a pedalboard! We’ve designed the Mastermind PBC to get the most out of pedalboards that include MIDI controllable pedals like those made by Eventide, Line 6 and Strymon. Not only does the PBC handle all of the audio routing and switching, but also its comprehensive MIDI features allow complete control over these pedals.

Boss ES-8 on RigShare
Boss
Boss

ES-8

The ES-8 Effects Switching System begins life with a sharp and clear mission: to provide pro and high-end users with cool and creative solutions. The new and innovative ES-8 is a system that represents a major leap “out of the box” from the standard individual stomp box utility. It is a whole new way of providing unprecedented capability without sacrificing sound quality. The ES-8 combines far-reaching flexibility with total freedom of expression. All this, in one cool device. Not just another utility tool, the ES-8 kicks down the door to unlimited possibilities in the universe of musical expression. From this day on, the use of stomp boxes will never be the same. Using BOSS’ advanced technology the ES-8 is designed for spontaneity on the stage. So, go ahead. Jump out of the box. Take the plunge into a whole new world of musical expression. Celebrate the birth of the cool at BOSS with the hot new ES-8 Effects Switching System. It’s a total game changer that will take you to places no musician has ever gone before.

Boss ES-5 on RigShare
Boss
Boss

ES-5

Based on the same concept and features as the flagship ES-8, the ES-5 is pared down to offer more practical and essential use options for typical guitarists and bassists, and is drastically reduced in size to fit ready-made, standard-size boards. The innovation in creativity of pedalboard systems made possible by the ES-8 has become more available and affordable. Expand your board just by one size and incorporate the ES-5, then you are in for a whole new world of musical expression, not just another utility tool. From this day on, the use of stompboxes will never be the same.

Chase Bliss Faves on RigShare
Chase Bliss
Chase Bliss

Faves

Faves™ is a dead simple MIDI controller that allows the user to access six presets as well as “live” mode on-the-fly for any of the Chase Bliss pedals.

Hilton Electronics Pro Guitar Pedal on RigShare
Hilton Electronics
Hilton Electronics

Pro Guitar Pedal

Designed for today's guitar player. Designed for use with, or without, a pedal effects board. Comes with it's own power supply, or easily powered with any pedal board power supply.

Tapestry Audio Bloomery Passive VP on RigShare
Tapestry Audio
Tapestry Audio

Bloomery Passive VP

When you choose an instrument, you are choosing to display your music through someone else’s creation. That’s why we are adamant about how we play and what gear we play through. The Bloomery volume pedal is our creation. We believe it to be the best expression pedal on the market for professional musicians who understand the importance of versatility through simplicity.