NS-2 Noise Suppressor

TC Electronic

Sentry Noise Gate

Multiband Noise-Gating Pedal with Hard-Gate Mode and Built-In TonePrints*

MXR Pedals

Smart Gate® Noise Gate

Equipped with three selectable types of noise reduction-Hiss, Mid, and Full-the Smart Gate Noise Gate bites down on sizzle and hum while still allowing your playing nuances through.

MXR Pedals

Noise Clamp

The Noise Clamp eliminates hiss & excess noise from your effects chain with a single threshold Trigger knob while maintaining riff definition at extreme gain levels.

TC Electronic

Iron Curtain Noise Gate

Ultra Fast and Efficient Noise Gate with 2-Knob Interface

CNZ Audio

Noise Gate - Guitar Effects Pedal

Noise Gate Pedal The Noise Gate Guitar Effects Pedal from CNZ Audio effectively tames your guitar signal, overdrive pedals, and entire effects chains! This pedal is perfect if you're trying to reduce buzz in your signal while you aren't playing. The Toggle Switch has two settings, Hard and Soft. The Hard setting adjust the pedal so that it's release is almost immediate. The Hard setting is perfect for getting rid of unwanted string noise and creating clean silence in between the notes of a heavy-metal riff. The Soft setting eases up on the release and allows your signal to end less abruptly. The Threshold Knob adjusts when the Pedal will begin cutting off a signal. If you set the Knob to -30 DB, the pedal will cut off any signal that is lower than that value. Setting the Threshold to higher values like +10 can create some great effects with Reverb and Heavy Distortion! The True-Bypass Footswitch allows for your tone to come through the pedal unaffected in the "off" position. Inspire your Music with CNZ Audio!

Zvex Pedals

Loop Gate

Gating very complex sounds like fuzz and delay is always a challenge. The Loop Gate™ provides a loop switch with a built-in "perfect" audio gate (high headroom, no distortion, no hiss) that lets you set up a loop of pedals you can switch in and out of your signal path at will, but you have a couple of really fun options to control that loop that include a cross-fade "mix" option, as well as creating tremolo-like sounds with "chop" mode. Pedal Dimensions (LxWxH): 4.70" x 2.38" x 1.82" Instructions (PDF)

Rowin Pedals

Noise Gate

Noise Gate 2 Working Modes: Hard/Soft Hard: Provide hard effect of noise reduction. Soft: Provide soft effect of noise reduction Full metal shell Very small and exquisite True bypass Specifications Effects Modes: 2 (Hard/Soft) Input: 1/4" monaural jack (impedance: 1M ) Output: 1/4" monaural jack (impedance: 100 Ohms) Power Requirements: AC adapter 9V DC (center minus plug) Current Draw: 26 mA

MXR Pedals

Smart Gate® Pro Rack Unit

This brilliant rack piece features the same great noise reduction as the pedal, but with the added features of two discrete channels, a Sync function, selectable ground lift, and remote switching capabilities.