Riverside is the culmination of a thorough analysis of numerous analog and vacuum tube circuits. Our goal? To deliver a new world of harmonically rich, incredibly versatile, tube-inspired drive sounds. We didn’t want to build just another distortion or overdrive. We knew we must examine what has been done, and bring a new approach to the world of drive sounds.
Riverside allows you to save and recall your favorite settings. Simply dial up your favorite sound, and press and hold the Favorite switch to save these settings. Instantly recall these settings with the press of the Favorite switch, or press again to return back to the current knob settings. It’s like having two drive pedals in one. Riverside gives you a three-position presence switch to tailor the highest frequencies of your output signal. Minus (-) provides clarity with a controlled top end that works well with brighter amps. Enhanced (center) extends the top end to allow for more sizzle on high gain tones. Plus (+) delivers extended high end detail to the darkest amps, and is also useful when plugging directly into a power amp. Riverside has an optional, variable-threshold noise reduction feature to tame hum, buzz, and system noise when you’re not playing. A downward expander with advanced signal detection techniques creates a seamless transition to noise reduced silence with all types of input signal dynamics, including staccato bursts and slowly decaying sustained notes. Chances are, you won’t want to wait for your solo to turn on Riverside. The boost pedal input allows you to leave Riverside on all the time with just the amount of dirt, distortion, and drive you desire, and then boost your overall output signal by up to +6dB when you need to jump up in the mix. Connect an external switch to engage and disengage Riverside’s Boost. Connect an expression pedal, and enjoy a whole new level of instantaneous, continuous control. Set as many knobs as you like for the heel position and toe position of your expression pedal, and all settings will simultaneously morph throughout the full range of the expression pedal. Riverside becomes part of your musical instrument, an extension of your musical voice, an active part of your performance. The Expression pedal jack can be set up in Volume Mode, which provides a logarithmic taper for smooth volume control. If you have an expression pedal, this provides an excellent alternative to a standalone Volume pedal. Want to control the Favorite preset settings on multiple Strymon pedals with just one switch? Connect a TRS cable from Riverside’s BOOST jack to the EXP input of another Strymon pedal and simultaneously engage the Favorite settings on both pedals.
Custom cascading multistage distortion topology provides a wide range of tube-inspired drive tones Digitally controlled analog class A JFET input gain stage maximizes headroom while adding up to 20dB of pure analog gain Precision crafted DSP gain stages provide detailed complexity and responsiveness Low gain channel for smooth classic overdrive High gain channel for modern saturated distortion 3-band EQ with independent Bass, Middle and Treble controls Selectable post-analog gain mid-band EQ push Presence switch to tailor the sound for use with all amplifiers from dark to bright Optional variable-threshold noise reduction helps tame noisy guitar pickups High impedance mono input Mono output Favorite footswitch to save a favorite setting Expression pedal input allows the connection an expression pedal for simultaneous morphing control over multiple parameters (Expression mode), or logarithmic taper for smooth volume control (Volume mode) Boost pedal input allows connection of an external footswitch for up to +6dB of analog boost, or to toggle the Favorite preset on other Strymon pedals (Favorite Out mode) Ultra low noise, high performance 24-bit 96kHz A/D and D/A converters provide uncompromising audio quality Premium analog front end and output section Super high performance SHARC DSP in a compact form factor 32-bit floating point processing True Bypass (electromechanical relay switching) or selectable transparent Analog Buffered Bypass Strong and lightweight anodized gold aluminum chassis 9V DC power supply included Power requirements: maximum 9 volts DC center-negative, with a minimum of 250mA of current Dimensions: 4.5″ deep x 4″ wide x 1.75″ tall 11.4 cm deep x 10.2 cm wide x 4.4 cm tall Designed and built in the USA