EarthQuaker Devices

Swiss Things™ Pedalboard Reconciler

Rig

1

EarthQuaker Devices Swiss Things™ Pedalboard Reconciler on RigShare

Swiss Things™ combines two true-bypass Flexi-Switch™ enabled effects loops, a Flexi-Switch™ AB-Y box with transformer isolation between outputs, a buffered tuner output, 20dB of clean boost with adjustable gain, an expression pedal output for volume control and a quiet, high headroom output buffer into a compact pedalboard-friendly signal routing junction box that lives at the top-right corner of your pedalboard and really ties your rig together without any signal loss.

Use as many pedals as you’d like without tone-suck
Quickly and easily bypass or engage all of your effects with one click
Use Flexi-Switch™ Technology with every pedal in your setup
Eliminate volume pedal tone-suck by using any expression pedal to control volume
Use multiple amps without phase issues, ground loops, or extra noise
Tidy up your rig, shorten cable runs, and reduce tone loss by keeping all inputs and outputs in one location

Measures: 4.75″ x 5.65″ x 2.25″ with knobs

Current Draw: 40mA

Input Impedance: 1M Ohm

Output Impedance: 1K Ohm

Flexi-Switching

This device features Flexi-Switch™ Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass.
For momentary operation, hold the footswitch down for as long as you’d like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

Power

This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Find it on Reverb

Musicians Using the Swiss Things™ Pedalboard Reconciler

What Musicians are Saying

One-liners are short gear reviews by the RigShare community.

Let us know what you think!

Write the first one-liner about the EarthQuaker Devices Swiss Things™ Pedalboard Reconciler

sponsored

Buy and Sell at Reverb

Similar Gear

Ditto Looper

Highly Intuitive Looper Pedal with 5 Minutes of Looping Time, Analog-Dry-Through and True Bypass

Ditto Stereo Looper

Highly Intuitive Looper Pedal with Stereo I/O and Loop Import/Export

Ditto X4 Looper

Simple and Intuitive Dual-Track Guitar Looper Pedal with Powerful Loop Effects

Klein Bottle multiband mixer/looper

The Klein Bottle was designed for the noise makers, soundscape artists, endless tinkerers and tone wizards. This epic pedal starts by splitting the input signal into three FX loops. Each FX loop has dedicated controls for pre-gain, HPF/LPF (bandwidth filters), and main mix level. This allows you to send different parts of the signal to different effects, and blend them all back together to create new tones out of your existing pedals. But wait, there's more! The magic happens when you use the independent feedback controls to send the signal from one FX loop into another...and then back again! Keep your existing tone intact with the DRY knob, while layering a cornucopia of sonic goodness on top.

RC-30 Loop Station

BOSS celebrates the 10th anniversary of the LoopStation with an exciting new lineup of RC-series loopers! First out of the gate is the RC-30, a Twin Pedal multitrack looper with two synchronized stereo tracks and built-in loop effects. Plug in your instrument of choice, or even a microphone; an XLR input is provided, complete with phantom power. Record for up to three hours direct to internal memory, adding effects as you go. The USB 2.0 port lets you save your loops externally, and import/export WAV files.

RC-3 Loop Station

The RC-3 is powerfully equipped yet conveniently housed in a compact pedal. Enjoy up to three hours of stereo recording time, storage for 99 loops, a “real drums” rhythm guide, and USB 2.0 compatibility all in a small BOSS stompbox.

RC-1 Loop Station

The BOSS RC-1 is our simplest and most user-friendly Loop Station ever, and it’s a ton of fun! Since the RC-20 Loop Station was first released in 2001, BOSS has led the way by continually releasing new looping products. Though they’ve been used and enjoyed by various looping artists and performers, BOSS still pursued an easier and more affordable solution. The RC-1 is a straightforward looper that is easy to operate. Experience the fun of looping when you record, playback, overdub, and undo or redo loops using this compact BOSS stompbox. And of course, the RC-1 retains the BOSS quality and performance that musicians around the world have come to expect and rely on. On the top panel, there is a new and innovative loop indicator, which consists of a 24-segment LED laid out in a circular pattern. You can quickly and easily determine the current status of the Rec/Overdub/Play modes. With a maximum 12 minutes of stereo recording time, the RC-1 is capable of capturing any extended performance that you can create or imagine! The stereo in/out jacks can be used with stereo effects and amplifiers. Additionally, they allow you to connect stereo instruments, such as synthesizers. Other convenient features include battery and AC power, as well as flexible external footswitching capabilities. The RC-1 is an especially great partner to start enjoying looping!

SL-20 Slicer

Inject a shot of high-octane fuel into your music with the SL-20 Slicer. Instantly transform a guitar, bass, keyboard, or vocal into a pulsating groove instrument. Choose from 50 onboard Slice patterns or experiment with the SL-20’s innovative Harmonic Slicer feature, which generates percussive melodies, Loop Record, and unique 3D Panning.