Universal Audio

710 Twin-Finity

Universal Audio 710 Twin-Finity on RigShare

Description

The award-winning 710 Twin-Finity™ is a radical UA mic preamp design that combines both the classic retro warmth of tubes with the transient bite of solid-state, all in a 2U, half-rack unit. The 710 was created specifically to add the tonal versatility and sonic inspiration missing from generic audio interface preamps. Tone blending is continually variable between 100% tube and 100% solid-state, offering a practically infinite range of unique preamp tones, plus the ability to easily dial-in your own signature sound. There are lots of sensibly priced solid-state and tube preamplifiers out there, but the 710 Twin-Finity is the only one that offers the best of both worlds - as well as everything in-between - all in one box, and within reach of any serious project studio's budget. Includes a 19" rack-kit for mounting one or two units. Like all our other preamp designs, the 710 features dual gain-stage controls (Gain/Level) which can radically vary the amount of coloration and distortion by allowing you to crank up the input gain like a guitar amp. The VU meter features a unique "Drive" mode allowing you to see how hard you are driving the input stage.

Find it on Reverb

What Musicians are Saying

One-liners are short gear reviews by the RigShare community.

Let us know what you think!

Write the first one-liner about the Universal Audio 710 Twin-Finity

sponsored

Buy and Sell at Reverb

Similar Gear

6 Slot High Current lunchbox®

The API 500-6B lunchbox is a 6-slot rack designed to accept all API standard 5.25" X 1.5" modules. This quality allows an engineer the flexibility to bring along specialized EQ effects to any situation: 550A, 550b or 560. The lunchbox has an internal power supply with a rear panel selected AC voltage switch and a removable power cord. The input/output jacks are XLR. The lunchbox comes standard with a +48 volt internal phantom power supply, bussed to pin 15 for interface with the API 512c Mic Preamplifier. API makes several modules for the 500-6B, including the 512c Mic Preamplifier, the 525 Compressor, the 527 Compressor, the 550A 3-band EQ, the 550b 4-band EQ and the 560 Graphic EQ. Combinations of these modules make perfect stereo recording packages (two 512cs and two 550bs) or vocalist's box (one 512c, two EQs and one 527).

Baxendale Guitar

Tube Tape Echo

Fulltone Tape echoes are the best sounding and feeling echo devices you will ever play through, and if you buy one I bet that you will own it for the rest of your life. It's not easy or cheap hand-building Tape Echoes in the USA, in California, none the less. It is an intense labor of love and a source of pride because honestly no one else can do it but me...or they would.

Alexander Pedals

Wavelength

More. That’s the best way we can describe the sounds and features of the Wavelength. We took everything from our Waveland Multi-Modulator and blew it up larger than life, while keeping it the exact same size. We’ve added some welcome improvements like more modulation engines and tap tempo, and some cool surprises like selectable waveforms. It’s a true all-in-wonder for your modulation needs.

Expanse

What is Expanse? It's a reverb, an echo, a shimmer and a chorus. It's all of these and more! Expanse can be programmed as any effect in Expanse Software: Reverb (Wet, hall, plate, spring, modulated); Shimmer; Echo, with/without reverb; Chorus or Detune, with/without reverb; Flanging;Phasing, Phased Doubling; Tremolo.

RC. 436 C Compressor Amplifier

The 436C Compressor Amplifier is a self-powered, level-controlling amplifier with a versatility which makes it a desirable part of most audio installations. In response to a strong input signal, it will reduce gain up to 30 db automatically, rapidly, and quietly, without the introduction of thumps. The 436C utilizes variable threshold/compression ratio and release time controls, permitting maximum flexibility in virtually any type of installation. The 436C Amplifier is intended for use in automatic level-control applications in recording. The front panel contains all controls and a meter which indicates db of compression and VU. A gain control is provided at the input, and the input and output transformers permit use on balanced lines. The 436C occupies only 2 unit of rack space in the standard rack. The wide range of application and excellent performance of this compressor amplifier will make it a valuable part of any good sound system.

1073LB Mono Mic Preamp module

Launched in 1970, the Neve 1073® is the first choice of leading producers and artists, delivering the unique Neve sound on some of the most famous recordings of the past 40 years. Designed and manufactured in England, the 1073LB retains the unique sonic characteristics of the original Neve 1073® Classic microphone preamplifier by using the same architecture, matching components and original hand-wound transformers. And it delivers it in a modern and portable form-factor that professional producers and engineers demand. With new features like a fine TRIM control, switchable microphone input impedance, signal presence LED, intelligent protected switching of front combi-XLR input connector and Neve’s clever Audio Processing Input design, the 1073LB takes your 500-series rack to the next level. Simply install into an empty slot in your compatible 500-series rack, connect your microphone or line level signals and inject that legendary sound into your audio creations.

1073LBEQ

Mono EQ Module - 500-series

Shadow Hills Industries

Dual Vandergraph

The Shadow Hills Dual Vandergraph is a direct descendant of the Shadow Hills Mastering Compressor and maintains its reputation of unquestionable quality and exceptional performance - in a 500 Series format. It’s inner workings are developed from the discrete gain cells of the Mastering Compressor which are combined with the Optograph’s extremely flexible Sidechain Filter matrix. This combination provides great possibilities for new recording techniques and the dynamic control. This stereo compressor’s fully discrete audio path is Class-A and features Shadow Hills' custom Iron Transformers. The controls are: Ratio, Filter, Compression and Output Level. Just like the Mastering Compressor, the Compression and Output Level controls are Swiss made twenty-four position attenuators. The Ratio switch, selects between: 1.2: 1, 2.5: 1, 4: 1, 8: 1. In addition to changing ratios, each selection changes preset attack and recover times. The Sidechain Filter Matrix controls the frequency sensitivity of the side-chain. The positions are: 90 hertz, 150 hertz, 250 hertz and Bandpass.