ISP Technologies

DECI-MATE™ Micro Decimator pedal

Rigs

2

ISP Technologies DECI-MATE™ Micro Decimator pedal on RigShare

Other noise gates have a release knob compromise to adjust the release response in an attempt to best match the release to your playing style. If you set a fast release to remove noise, the instant you stop playing, the long sustained notes will either get an undesirable cutoff or will chop off the signal with a very ugly modulated release as the signal decays. The Decimator provides a fully adaptive release response, which tracks the envelope of the signal and instantly changes the release from super fast to a long, smooth release for sustained notes. The new Decimator X™ technology uses time vector integration and eliminates any modulation of the note. This allows long sustained notes to providing amazingly smooth response. Why adjust a fixed release time when you can have a full adaptive response that tracks exactly what you’re playing all in a super small package that delivers transparent performance. Also, the DECI-MATE won’t alter your tone. The DECI-MATE is a full analog design without any digital artifacts or aliasing for the most transparent noise reduction available. Made in the USA

Full Decimator in MICRO Pedal package
True Bypass design
New DECIMATOR X Technology uses Time Vector Integration. Adaptive release provides smoothest release response possible
Adaptive release tracks both staccato and long sustained notes
Adaptive tracking response tracks any playing style
Greater than 90db effective noise reduction
Superior design to noise gates using downward expansion with adaptive release
Analog circuit for transparency / no digital aliasing

Pedal Type : Guitar Noise Reduction
Inputs : 1X Guitar Input ¼ inch
Input Impedance : 500k ohms
Maximum Input Level : +10 dbU
Output : 1X ¼ inch
Maximum Noise Reduction : Greater than 90db
Release Response : Adaptive over 1000 to 1 ratio
True Bypass : Yes
Chassis Size : 3.7 inches x 1.5 inches x 1.3 inches
Power Input : 9VDC 40 milliamp minimum / tip :negative / sleeve : positive
Power Supply Included : NO

Find it on Reverb

Musicians Using the DECI-MATE™ Micro Decimator pedal

What Musicians are Saying

One-liners are short gear reviews by the RigShare community.

Let us know what you think!

Write the first one-liner about the ISP Technologies DECI-MATE™ Micro Decimator pedal

sponsored

Buy and Sell at Reverb

Similar Gear

Sentry Noise Gate

Multiband Noise-Gating Pedal with Hard-Gate Mode and Built-In TonePrints*

Smart Gate® Noise Gate

Equipped with three selectable types of noise reduction-Hiss, Mid, and Full-the Smart Gate Noise Gate bites down on sizzle and hum while still allowing your playing nuances through.

Noise Clamp

The Noise Clamp eliminates hiss & excess noise from your effects chain with a single threshold Trigger knob while maintaining riff definition at extreme gain levels.

Iron Curtain Noise Gate

Ultra Fast and Efficient Noise Gate with 2-Knob Interface

Noise Gate - Guitar Effects Pedal

Noise Gate Pedal The Noise Gate Guitar Effects Pedal from CNZ Audio effectively tames your guitar signal, overdrive pedals, and entire effects chains! This pedal is perfect if you're trying to reduce buzz in your signal while you aren't playing. The Toggle Switch has two settings, Hard and Soft. The Hard setting adjust the pedal so that it's release is almost immediate. The Hard setting is perfect for getting rid of unwanted string noise and creating clean silence in between the notes of a heavy-metal riff. The Soft setting eases up on the release and allows your signal to end less abruptly. The Threshold Knob adjusts when the Pedal will begin cutting off a signal. If you set the Knob to -30 DB, the pedal will cut off any signal that is lower than that value. Setting the Threshold to higher values like +10 can create some great effects with Reverb and Heavy Distortion! The True-Bypass Footswitch allows for your tone to come through the pedal unaffected in the "off" position. Inspire your Music with CNZ Audio!

Loop Gate

Gating very complex sounds like fuzz and delay is always a challenge. The Loop Gate™ provides a loop switch with a built-in "perfect" audio gate (high headroom, no distortion, no hiss) that lets you set up a loop of pedals you can switch in and out of your signal path at will, but you have a couple of really fun options to control that loop that include a cross-fade "mix" option, as well as creating tremolo-like sounds with "chop" mode. Pedal Dimensions (LxWxH): 4.70" x 2.38" x 1.82" Instructions (PDF)

NS-2 Noise Suppressor

The NS-2 Noise Suppressor eliminates unwanted noise and hum without altering an instrument's natural tone. It's the perfect pedal to quiet down any pedalboard or effects setup.

Noise Gate

Noise Gate 2 Working Modes: Hard/Soft Hard: Provide hard effect of noise reduction. Soft: Provide soft effect of noise reduction Full metal shell Very small and exquisite True bypass Specifications Effects Modes: 2 (Hard/Soft) Input: 1/4" monaural jack (impedance: 1M ) Output: 1/4" monaural jack (impedance: 100 Ohms) Power Requirements: AC adapter 9V DC (center minus plug) Current Draw: 26 mA