ISP Technologies

Decimator

Rig

1

ISP Technologies Decimator on RigShare

The Decimator guitar pedal offers a new approach to noise reduction processing. Most noise suppression systems suffer from one major problem inherent in their design: The system cannot be immediately responsive to very short-term staccato notes. The typical downward expander sound reduction system suffers from a dead zone in the release response characteristic that causes a compromise in tracking both fast decaying notes and long sustained notes. The Decimator pedal's design offers a novel approach to tracking the envelope of the input signal called Time Vector Processing. Due to this novel approach in controlling the expander, the Decimator system will instantly respond to short staccato notes and, at the same time, will provide a very slow ripple free control of long sustained notes. The Decimator noise suppression system is very transparent delivering high performance. The Decimator pedal by ISP Technologies is extremely easy to use; simply insert the Decimator at the end of your chain of existing pedals or, insert the Decimator Pedal in the effects loop of your amplifier to clean up the noise present at the amplifier input as well as the noise in the amplifiers pre-amp section. Packaged in a rugged, beautifully polished smooth chrome chassis, the Decimator pedal offers reliability, performance and beauty in one compact pedal.

Latest generation of noise reduction technology
60dB of noise reduction
Time Vector processing
Transparent operation
Will not affect guitar tone
Dynamically tracks the input signal
Patent Pending NR technology
Polished chrome chassis

Input Impedance: 500K ohms
Maximum Input Level: +12dbu
Effective Noise Reduction: greater than 60db
Dynamic Range: greater than 100db
Total Harmonic Distortion: .05% typical
Power consumption: 35mA @9VDC
Release response: Program dependant based on Time Vector Processing

Find it on Reverb

Musicians Using the Decimator

What Musicians are Saying

One-liners are short gear reviews by the RigShare community.

Let us know what you think!

Write the first one-liner about the ISP Technologies Decimator

sponsored

Buy and Sell at Reverb

Similar Gear

Sentry Noise Gate

Multiband Noise-Gating Pedal with Hard-Gate Mode and Built-In TonePrints*

Smart Gate® Noise Gate

Equipped with three selectable types of noise reduction-Hiss, Mid, and Full-the Smart Gate Noise Gate bites down on sizzle and hum while still allowing your playing nuances through.

Noise Clamp

The Noise Clamp eliminates hiss & excess noise from your effects chain with a single threshold Trigger knob while maintaining riff definition at extreme gain levels.

Iron Curtain Noise Gate

Ultra Fast and Efficient Noise Gate with 2-Knob Interface

Noise Gate - Guitar Effects Pedal

Noise Gate Pedal The Noise Gate Guitar Effects Pedal from CNZ Audio effectively tames your guitar signal, overdrive pedals, and entire effects chains! This pedal is perfect if you're trying to reduce buzz in your signal while you aren't playing. The Toggle Switch has two settings, Hard and Soft. The Hard setting adjust the pedal so that it's release is almost immediate. The Hard setting is perfect for getting rid of unwanted string noise and creating clean silence in between the notes of a heavy-metal riff. The Soft setting eases up on the release and allows your signal to end less abruptly. The Threshold Knob adjusts when the Pedal will begin cutting off a signal. If you set the Knob to -30 DB, the pedal will cut off any signal that is lower than that value. Setting the Threshold to higher values like +10 can create some great effects with Reverb and Heavy Distortion! The True-Bypass Footswitch allows for your tone to come through the pedal unaffected in the "off" position. Inspire your Music with CNZ Audio!

Loop Gate

Gating very complex sounds like fuzz and delay is always a challenge. The Loop Gate™ provides a loop switch with a built-in "perfect" audio gate (high headroom, no distortion, no hiss) that lets you set up a loop of pedals you can switch in and out of your signal path at will, but you have a couple of really fun options to control that loop that include a cross-fade "mix" option, as well as creating tremolo-like sounds with "chop" mode. Pedal Dimensions (LxWxH): 4.70" x 2.38" x 1.82" Instructions (PDF)

NS-2 Noise Suppressor

The NS-2 Noise Suppressor eliminates unwanted noise and hum without altering an instrument's natural tone. It's the perfect pedal to quiet down any pedalboard or effects setup.

Noise Gate

Noise Gate 2 Working Modes: Hard/Soft Hard: Provide hard effect of noise reduction. Soft: Provide soft effect of noise reduction Full metal shell Very small and exquisite True bypass Specifications Effects Modes: 2 (Hard/Soft) Input: 1/4" monaural jack (impedance: 1M ) Output: 1/4" monaural jack (impedance: 100 Ohms) Power Requirements: AC adapter 9V DC (center minus plug) Current Draw: 26 mA