Empress Effects
ParaEq
The ParaEq w/Boost gives musicians a powerful, musical, high quality EQ in a conveniently small package. The signal path of the ParaEq w/Boost is comprised of the highest quality components chosen for their transparency, powerful tone shaping capabilities, and low operating noise. With the Empress ParaEq w/Boost your instrument will still sound like your instrument, only better.
3 bands of parametric EQ, each with 3 selectable q widths, give you extremely flexible EQ. The wide Q is great for general tone shaping and is extremely transparent. The medium Q is perfect for everyday problem solving like pulling out boxiness from the low mids to reducing harshness and adding bit in the upper mids. The narrow Q excels at notching out problem frequencies and is a saviour for acoustic guitarists when combating feedback issues.
The Boost section offers 30dB of clean boost and can be set to engage with the EQ section to act as a make-up gain when doing subtractive EQ, or can be used completely separately as a pure clean boost. Great for bumping up your volume for solos or hitting the front end of a tube amp for a bit more break-up.
The Boost section offers 30dB of clean boost and can be set to engage with the EQ section to act as a make-up gain when doing subtractive EQ, or can be used completely separately as a pure clean boost. Great for bumping up your volume for solos or hitting the front end of a tube amp for a bit more break-up.
- All Analog Signal Path – to deliver the most organic tone possible.
- Ultra Transparent Sweet Sounding EQ – enhance your sound without masking the tone of your instrument.
- Lots of Control - with switchable q, fully over-lapping sweepable frequency selection, and 15dB of cut and boost you’ll get all the control you need.
- Ultra-Quiet – You’ve come to expect our pedals to be noise free and we’ve delivered once again. If you put this at the front of your chain and boost a bit you’ll also cut down on the noise your other pedals are introducing.
- Loads of Headroom - Internally switchable to run off 9/12/18V power supplies.
- 30dB of Boost - making it an ideal candidate before long effects chains and overdriving tube amps.
- Pristine Clean Sound – We measured the distortion to be less than 0.03%. Pretty remarkable for a guitar pedal.
- True Bypass - The Empress ParaEq w/Boost EQ Pedal employs true bypass, so you can be sure that it's not affecting the signal when disengaged.
- Perfect Size - The enclosure measures approximately 4.5" by 3.5" by 1.5", which is delightfully small when considering all the features packed into this unit.
- Power Input Voltage | 9 - 18 V DC (Negative tip)
- Power Input Connector | 2.1mm barrel connector (Negative tip)
- Power Consumption | 85mA (does not change with input voltage)
- Enclosure Material | Die Cast Aluminum
- Input connector | 1/4" Jack
- Output connector | 1/4" Jack
- Height (Enclosure only) | 1.5"
- Height (including controls) | 2"
- Length | 3.5"
- Width | 4.5"
- Weight | 1 lb
- Q's | 0.5, 1.5 and 3
- Input impedance | 1MΩ
- Output impedance | 510Ω
Price
$249.00
Musicians Using the ParaEq
What Musicians are Saying
One-liners are short gear reviews by the RigShare community.
1
Great tool for acoustics. Boost is great for acoustics as well.
· mattmarinchick· 5y ago Let us know what you think!
Write a one-liner about the Empress Effects ParaEq or cast a vote!
sponsored
