One-liners are short gear reviews by the RigShare community.
Concord Utility Buffer
Handbuilt in Bixby, Oklahoma USA using premium audio grade components to provide ultimate clarity and signal response. This utility pedal "buffers" your signal to bring back the clarity and high end sparkle of your input signal that is lost when you use a lot of pedals and/or have lots of cable between your guitar or bass, and your amp. This pedal is a tool that once you have on your rig you'll never wanna be without it. It can be run at 9-18v (18v for more headroom).
OBNE EQ + Buffer
OBNE Utility 3 is an always on Buffer and switchable 3 Band EQ. The buffer is helpful for long cable setups or when using an overabundance of pedals. The EQ is helpful in tailoring frequencies to specific parts, guitar switches or using it as an always on EQ.
The Empress buffer was designed to be the complete I/O interface for the pedal board, while maintaining the highest fidelity to your guitar's signal. Signal loss due to long, un-buffered cable runs is an issue that has plagued guitar players for decades. The primary goal of the buffer is to eliminate this signal loss, ensuring that your tone is unchanged by your cables. Additionally, all the connectivity of your pedal board is consolidated to make set up quick and easy.
The Empress buffer+ was designed to be the complete I/O interface for the pedal board, while maintaining the highest fidelity to your guitar's signal. Signal loss due to long, un-buffered cable runs is an issue that has plagued guitar players for decades. The primary goal of the buffer+ is to eliminate this signal loss, ensuring that your tone is unchanged by your cables. Additionally, all the connectivity of your pedal board is consolidated to make set up quick and easy. The buffer+ also has a very handy set of features that make life just a little better. Noise filters, input pads, switchable clean boost and input loading are all powerful tools available on the buffer+
The Empress Buffer+ Stereo was designed to be the complete I/O interface for your pedalboard, all while maintaining the highest fidelity of your guitars' signal. Signal loss due to long. un-buffered cable runs is an issue that has plagued guitar players for decades. The primary goal of the Buffer+ Stereo is to eliminate this signal loss, ensuring that your tone is unchanged by your cables. We've incorporated all the features of our Buffer+ such as the foot-switchable boost, input padding, noise filters, and variable input loading, as well as a ton of additional features such as input metering and clip level indicators, AB/AY switching, external switch control, and of course full stereo in/out connectivity.
Prism – Special Edition Blue!
The PRISM – SPECIAL EDITION have been anodized Blue and feature laser engraved text! Give your board some color and update today with the PRISM SPECIAL EDITION! Designed as the ultimate tone shaping tool for a player’s pedalboard, the PRISM is a buffer, boost, preamp, EQ and overdrive all in one beautiful and compact stainless steel enclosure!
Accurate copy of the input signal frequency and removal of unconventional signal frequency, which perfectly output the original signal to the next pedal, thus obtaining the original musical sound Equipped with a High-cut & Low-cut switch and a Boost knob, making the Micro Buffer feature richer and more convenient to use Low Cut Frequency: 140Hz High Cut Frequency: 4. 5kHz Specifications Input : 1/ 4â€monaural jack (impedance: 1M Ohms) Output : 1/ 4â€monaural jack (impedance: 120 Ohms) Power Requirements: AC adapter 9V DC (center minus plug) , Current Draw:20 mA Dimensions: 93. 5mm (D) Ã— 42mm (W) Ã— 52mm (H) Weight : 145g recommended to use Mooer Micro Power
High-Wire™ Dual Buffer & Output Boost
The HIGH-WIRE™ is our Dual Buffer and Line Driver in a one-stop solution that addresses both Input and Output challenges in the same space saving chassis. Between Instrument and pedals, it provides a stable, consistent load for your guitar’s pickups, ensuring your signal arrives at the first pedal intact and full of Tone. From Pedal Board to the amplifier, it not only buffers the signal, ensuring optimum impedance loading and performance, but also allows for increased signal levels for extra long cable runs via the built-in Line Driver (Footswitchable Boost) feature. As with the Stowaway, all buffer circuitry is 100% discrete Class-A. The HIGH-WIRE also incorporates a fixed +3dB BOOST on a top mounted mini-toggle. The Footswitch is Dual Function and allows both the variable BOOST when hit once and a MUTE when held for a second. The HIGH-WIRE is the ultimate all-in-one Pedal Board signal loss remedy and will remove your tightrope Tone walk once and for all.