The Amp

Neunaber Audio

Iconoclast Speaker Emulator

Iconoclast dynamically shapes your tone as a speaker cabinet would yet outputs directly to headphones, powered speakers, a mixer or recording interface. When paired with the drive pedal or preamp of your choice, Iconoclast delivers consistent amp tone at any volume—and in virtually any setting—often without needing to bring anything more than your pedal board.

Atomic Amps

Ampli-Firebox

Ampli-Firebox is the world’s first tube amp modeling and cabinet impulse response IR loader in a compact stomp-box Access nine presets instantly using toggle switches – each with their own selectable amp model, custom uploadable cabinet impulse response, and effects settings. Channel switching mode lets you toggle between any two custom presets instantly on the fly via footswitch. Gain and Master control knobs adjust the preamp gain and power amp drive settings just like a physical tube amp. Bass, mids, and treble controls authentically reproduce the tones and (sometimes quirkly) interactions as their physical tube amp counterparts. Presence knob mimics the same brightness control as the feedback circuits found in tube power amps. Overdrive modeler simulates overdrives, fuzz, and clean boost effects. Built in effects including overdrive, delay, reverb, compressor, EQ and gate Dual simultaneous outputs: XLR direct and ¼” outputs. Choose cabinet modeling on XLR only, ¼” only or both to fit your stage or recording hookup needs. USB connectivity allows deep editing, backup/restore of your presets, footswitch customization, and importing AmpliFire / AmpliFire12 presets via the free Ampli-Firebox Editor software available for Windows and Mac OSX. And, of course, the world renown and patented tube amplifier modeling brought to you by Studio Devil Virtual Tube Amp Technology. Transform your pedal board into a direct/recording solution. Leave the amp at home and go direct with Ampli-Firebox! Preset compatible with AmpliFIRE line of products

Two Notes Audio Engineering

Torpedo C.A.B.

A high-end cabinet simulator in a stompbox format. It includes all the great features of the Torpedo Live, without the loadbox but with an input stage specifically tailored to accept pedal-level signals.

Rowin Pedals

Amp Pusher

Wide range frequency response AMP sound, also sounds good on bass Full metal shell Very small and exquisite True bypass Specifications Input: 1/4" monaural jack (impedance: 1M ) Output: 1/4" monaural jack (impedance: 1k Ohms) Power Requirements: AC adapter 9V DC (center minus plug) Current Draw: 14 mA

Bogner Amps

Ecstasy Blue

The Ecstasy amplifier was born in 1992 and decades later Bogner is still hand building each amp, one at a time, right here in Los Angeles, California. The Ecstasy blue pedal captures the classic blue channel tone of this legendary amplifier, acclaimed for its ability to deliver iconic and classic rock-n-roll crunch. Everyone knows that blue delivers stunning Plexi tones, but when the going gets rough, make no mistake - blue can crush on demand. Reinhold designed the Ecstasy blue pedal with four discrete Class A gain stages and with no op-amps or diode clipping, mirroring the circuitry of the Ecstasy amplifier's blue channel. This revolutionary approach provides clarity, touch sensitivity and note separation never before achieved in overdrive pedals. The Ecstasy blue is powered by a standard 9V battery or 9VDC power supply. Reinhold's advanced circuitry internally elevates the voltage a substantially higher level. This higher voltage provides a greater dynamic range which closely resembles the feel of the Ecstasy amplifier's legendary tube design. Features: True bypass Boost function with independently lit volume and gain controls Master Controls: volume, treble, middle, bass and gain Variac On/Off switch: adds a "dropped voltage" dynamic compression to the feel and sound Mode Switch: Plexi and Blue offers vintage lower gain or modified higher gain levels Pre-Eq Switch: B1, N and B2 settings control "openness" and presence of higher range harmonics Structure Switch: 100, 101 and 20th Anniversary settings offer EQ shifts and gain structures from various eras/models of Ecstasy amplifiers Jacks: input, output and remote. Remote jack allows control of the on/off and boost functions via a remote switching unit Low Battery Indicator: LEDs blink when battery voltage drops below critical threshold. Premium components include: Double sided gold plated circuit boards, German WIMA capacitors, Japanese Nichicon capacitors and gold plated relays, Carling switches and more

Bogner Amps

Ecstasy Red

The Ecstasy amplifier was born in 1992 and decades later Bogner is still hand building each amp, one at a time, right here in Los Angeles, California. The Ecstasy red pedal captures the mystical red channel tone of this legendary amplifier, famous for its incendiary higher gain crunch and lead tones. Using interactive controls to adjust gain and EQ settings, the red pedal delivers a wide range of expressive tones from vintage overdrive to ripping modern high gain. Ideal for aggressive playing styles, the red pedal boasts the outrageous heavy tones that get Bogner amps into the backlines of rock's most notable players. Reinhold designed the Ecstasy red pedal with five discrete Class A gain stages and with no op-amps or diode clipping, mirroring the circuitry of the Ecstasy amplifier's red channel. This revolutionary approach provides clarity, touch sensitivity and note separation never before achieved in overdrive pedals. The Ecstasy red is powered by a standard 9V battery or 9VDC power supply. Reinhold's advanced circuitry internally elevates the voltage a substantially higher level. This higher voltage provides a greater dynamic range which closely resembles the feel of the Ecstasy amplifier's legendary tube design. Features: True bypass Boost function with independently lit volume and gain controls Master Controls: Gain, Treble, Middle, Bass and Volume Variac On/Off switch: adds a "dropped voltage" dynamic compression to the feel and sound Mode Switch: Tight, Mellow and Full, shapes the general EQ curve and gain levels Pre-EQ Switch: B1, N and B2 settings control "openness" and presence of higher range harmonics Structure Switch: 100, 101 and 20th Anniversary settings offer EQ shifts and gain structures from various eras and models of Ecstasy amplifiersJacks: input, output and remote. Remote jack allows control of the on/off and boost functions via a remote switching unit Low Battery Indicator: LEDs blink when battery voltage drops below critical threshold. Premium components include: Double sided gold plated circuit boards, German WIMA capacitors, Japanese Nichicon capacitors and gold plated relays, Carling switches and more

Bogner Amps

La Grange

The La Grange pedal is designed to emulate the famous British "Plexi" amplifiers from the mid 60's. The wide variety of controls and switches, give you decades of legendary plexi tones, all the way up to the era of the modded amps from the late 80's and throughout the 90's. An independent boost function, with a level control, can be activated via it's own foot-switch to be either used as a stand alone boost, or together with the La Grange's main circuitry. Essentially two independent pedals, with the boost being in series after the La Grange! Reinhold designed the La Grange pedal with an op-amp input, followed by five discrete Class A gain stages and incorporated Germanium diode clipping. This approach minimizes the input noise floor while retaining touch sensitivity and clarity throughout the entire gain range. The La Grange pedal is powered by a standard 9V battery or 9VDC regulated power supply. Reinhold's advanced circuitry internally elevates the voltage to a substantially higher level. The higher voltage provides a greater dynamic range which closely resembles the feel of a real amplifier; therefore running the pedal above 9VDC will not improve dynamics and even can damage the circuit, therefore only use a regulated 9VDC power supply! Features: True bypass Independent boost with level control Master Controls: volume, tone, channel blend and gain controls Channel Blend simulates the two channels of a four input 67-69 plexi amplifier 3 position gain switch for low (plexi), medium (normal) and high (modded) gain structure Variac mode for "brown sound", added dynamic compression with enhanced harmonics 2 position presence switch for overall brightness 3 position structure switch for a tight focused, fat loose or in between sound and feel Jacks: input, output and exp. for foot controllable gain via the output of a volume pedal. Low Battery Indicators: LEDs blink when battery voltage drops below critical threshold. Premium components include: Double sided gold plated circuit boards, German WIMA capacitors, Japanese Nichicon capacitors and gold plated relays, Carling switches and more

Pedalpalfx

PAL 800 Jcm Emulator

Now you will have the tone of an era at your feet. This 100% handmade pedal (one by one) uses the same circuit schematic that you will find in the most famous British Amps from the 80's, using especially selected transistors instead of vacuum tubes. Each pedal is carefully setup by hand for maximum performance and tested by the founders of PedalPalFx, therefore it is not a massive production pedal and there will be only a few per month available on the market, a true “Boutique Pedal”.