Rigs

2

Two Notes Audio Engineering Torpedo C.A.B. on RigShare
A high-end cabinet simulator in a stompbox format. It includes all the great features of the Torpedo Live, without the loadbox but with an input stage specifically tailored to accept pedal-level signals.
Input / Output
GTR/LINE Input: 1/4″ Jack balanced (TRS, Tip/Ring/Sleeve) — Max level: 4,7 dBu (GTR) / 10,3 dBu (LINE) — Impedance : 100 KOhms (GTR) / 10 KOhms (LINE)
AMP/LINE Output: 1/4″ Jack balanced (TRS) – Max level: 10 dBu (AMP) / 16 dBu (LINE) – Impedance : 470 Ohms
Phones: 1/4″ Jack stereo (TRS)

MIDI input
USB connector

Digital audio
24 bits / 96 kHz converters
Bandwidth (-1dB): 12Hz – 19 kHz
Signal/Noise ratio: > 95 dB
Internal processing at 32 bits
Latency: 1.7 ms (Line Input to Line Output)

Power
Mains power adapter: DC Jack 2.1mm, negative center
Input voltage: 12V DC
Power consumption: approx. 3.6W
Current consumption: 300mA

Dimensions & weight
Width x depth x height: 178 x 127,8 x 58,3 (mm)
Weight: 750 g

Musicians Using the Torpedo C.A.B.


What Musicians are Saying

One-liners are short gear reviews by the RigShare community.

Let us know what you think!

Write the first one-liner about the Two Notes Audio Engineering Torpedo C.A.B.

sponsored
Buy and Sell at Reverb

Similar Gear

Neunaber Audio Iconoclast Speaker Emulator on RigShare

Iconoclast dynamically shapes your tone as a speaker cabinet would yet outputs directly to headphones, powered speakers, a mixer or recording interface. When paired with the drive pedal or preamp of your choice, Iconoclast delivers consiste...

Atomic Amps Ampli-Firebox on RigShare

Ampli-Firebox is the world’s first tube amp modeling and cabinet impulse response IR loader in a compact stomp-box Access nine presets instantly using toggle switches – each with their own selectable amp model, custom uploadable cabinet ...

Rowin Pedals Amp Pusher on RigShare

Wide range frequency response AMP sound, also sounds good on bass Full metal shell Very small and exquisite True bypass Specifications Input: 1/4" monaural jack (impedance: 1M ) Output: 1/4" monaural jack (impedance: 1k Ohms) Power...

Bogner Amps Ecstasy Blue on RigShare

The Ecstasy amplifier was born in 1992 and decades later Bogner is still hand building each amp, one at a time, right here in Los Angeles, California. The Ecstasy blue pedal captures the classic blue channel tone of this legendary amplifier...

Bogner Amps Ecstasy Red on RigShare

The Ecstasy amplifier was born in 1992 and decades later Bogner is still hand building each amp, one at a time, right here in Los Angeles, California. The Ecstasy red pedal captures the mystical red channel tone of this legendary amplifier,...

Bogner Amps La Grange on RigShare

The La Grange pedal is designed to emulate the famous British "Plexi" amplifiers from the mid 60's. The wide variety of controls and switches, give you decades of legendary plexi tones, all the way up to the era of the modded amps from the ...

Pedalpalfx PAL 800 Jcm Emulator on RigShare

Now you will have the tone of an era at your feet. This 100% handmade pedal (one by one) uses the same circuit schematic that you will find in the most famous British Amps from the 80's, using especially selected transistors instead of vacu...

Pedalpalfx PAL 959 Plexi Emulator on RigShare

Now you will have the tone of an era at your feet. This 100% handmade pedal (one by one) uses the same circuit schematic that you will find in the most famous British Amps from the 60's, using especially selected transistors instead of vacu...