Pedalboards And Power Supplies

Strymon

Zuma

Zuma is the highest horsepower, most technologically advanced effects pedal power supply of its kind. Zuma offers nine high-current, individually isolated, ultra-low-noise outputs—each with its own dedicated regulator and custom transformer. Designed to meet the needs of today’s players, each output provides a staggering 500mA of current. Zuma’s dual-stage topology, pre-regulated outputs, optically isolated feedback, and advanced multistage filtering result in a power supply that allows your pedals to achieve their highest possible dynamic range.

Strymon

Ojai

Power your pedals with Ojai—the highest horsepower, most technologically advanced effects pedal power supply of its size. Ojai delivers clean, rock-steady power to your effects pedals in a lightweight and expandable package, giving you flexibility and room to grow. You get five high-current, individually isolated, ultra-low-noise outputs—each with its own dedicated regulator and custom transformer. Each output provides a massive 500mA of current. Ojai’s dual-stage topology, pre-regulated outputs, optically isolated feedback, and advanced multistage filtering result in a power supply that allows your pedals to achieve their highest possible dynamic range.

Voodoo Lab

Pedal Power® 2 Plus

Filter, regulate, isolate, and protect! Pedal Power® 2 PLUS does it, and does it well, because any less will degrade your pedal’s performance. Players everywhere upgrade to Pedal Power 2 PLUS because it powers what conventional power supplies can’t. Pedal Power 2 PLUS is hand made in the U.S.A., comes complete with cables, detachable AC power cord, a 5-year warranty, and simply makes you sound better!

Walrus Audio

Phoenix 15-Output Power Supply 120V

The Phoenix Clean Power Supply is a 15-output isolated power supply, utilizing two internal custom wound toroidal transformers to provide the highest noise filtering and cleanest power, giving artists the purest sound in their signal chain possible. The Phoenix fits under most pedal boards including Pedaltrain (PT JR and up), Pedal Pad, Blackbird Boards, Creation Music Company, and Holeyboards. We offer a pedal board mounting kit that is sold separately for Pedaltrain type decks. The Phoenix comes in a durable midnight blue texture enclosure and can more than hold up to the demands of touring.

Walrus Audio

Aetos (8-Output) Power Supply 120V

The Walrus Audio Aetos is an 8-output, isolated power supply, utilizing an internal custom wound toroidal transformer to provide the highest noise filtering and cleanest power, giving artists the purest sound in their signal chain. The Aetos is housed in a solid die cast enclosure and is 4.7”long x 3.7” wide x 2” height and has 8 total 9VDC outputs, 6 are 100mA and 2 outputs are high current outputs (300mA) for higher current drawing pedals like line 6 DL series modelers, the Boss Twin Series Pedals and many digital modulation pedals on the market. It comes with a detachable 120V AC Power cord and also has a 120VAC complimentary power output. This unit comes with 8 – 2.1mm barrel black power cables and 2 black-to-red (Line 6) power cables. Fits under most pedal boards including Pedaltrain (PT JR and up), Pedal Pad, Blackbird Boards, Creation Music Company, and Holeyboards.

Pedaltrain Pedalboards

Classic 2 with Soft Case

The Classic 2 should be familiar to you. Based on the original PT-2, the Classic 2 features Pedaltrain's original four-rail design and traditional rail spacing. However, the Classic 2 has been updated with an open front design (portholes are history) making power supply mounting more flexible and convenient. The elevation has been raised by approximately 1 inch to clear a wider variety of power supplies and switching systems. Classic 2 is available for purchase with either Pedaltrain's fitted soft case (featuring a heavy-duty metal zipper and reinforced stress points) or Pedaltrain's professional-grade tour case.

Voodoo Lab

Pedal Power ISO-5 Power Supply

The Voodoo Lab Pedal Power ISO-5 is an isolated power supply for powering guitar pedal effects and accessories. It's the ultimate compact solution for smaller pedal boards, rack shelves, or even as an additional power supply for larger boards. With five isolated, filtered and regulated output sections, ISO-5 keeps even the most sensitive vintage and boutique analog pedals dead quiet. Pedal Power ISO-5 includes a high-current output which will properly power modern digital power-hungry effects like those from Eventide, Line 6, and TC Electronic. The power supply also has a dedicated 18V output for those guitar pedals that need the higher voltage for extra headroom. Designed to meet the needs of professional users, Voodoo Lab Pedal Power ISO-5 will provide clean, consistent power, even with the poor AC line conditions often found on stage. Its completely isolated output sections eliminate ground loops, hum, and unwanted interactions between effects, resulting in lower noise and noticeably improved tone.

Truetone

1 Spot Pro CS12

Power Supply

Pedaltrain Pedalboards

Classic JR with Soft Case

Pedaltrain’s Classic Series is rooted in the company’s best-selling pedal board models. The Classic JR model should be familiar to you. Based on the original PT-JR, the Classic JR features Pedaltrain’s original four-rail design and traditional rail spacing. The Classic JR features an open front design, (portholes are history) making power supply mounting more flexible and convenient. Classic JR was designed to provide a wider stance at 18 inches and raised elevation by approximately 1 inch. Classic JR is available for purchase with either Pedaltrain’s fitted soft case (featuring a heavy-duty metal zipper and reinforced stress points) or professional-grade tour case.

Truetone

CS7

1 SPOT Technology… what does that mean and why should I care? Technically, it’s switching power supply technology, which is very different than what anyone has ever put inside a power brick. Normally, you would find just a big transformer and a handful of small electronic components inside a power brick… old tech that hasn’t changed in decades and has a lot of limitations. We took the same switching power supply technology found in our famous 1 SPOT and scaled it up to make the 1 SPOT Pro models. With much more space to work with, we were able to completely eliminate noise, provide total electrical isolation between outputs, create multiple voltages, and still give you the ability to use it anywhere in the world. A major benefit of using a switching power supply is that it can handle far more current (power being pulled out of it) than any transformer-based power supply. Although we had to put power rating labels on each output to satisfy certification agencies (yes, we actually certified these, unlike most companies), the outputs can generally handle far more than the label shows. For example, you can connect a 300mA pedal to a 200mA output, without causing any problems. With a transformer-based power supply, you can’t get away with that. The important thing is to not exceed the total of all the labels. With a CS7, the output labels add up to 1900mA total. That means the total current draw of all your pedals should be less than 1900mA. That total current rating is roughly double the current load of the most common power brick, for a lot less money.

Pedaltrain Pedalboards

Classic 2 with Tour Case

The Classic 2 should be familiar to you. Based on the original PT-2, the Classic 2 features Pedaltrain's original four-rail design and traditional rail spacing. However, the Classic 2 has been updated with an open front design (portholes are history) making power supply mounting more flexible and convenient. The elevation has been raised by approximately 1 inch to clear a wider variety of power supplies and switching systems. Classic 2 is available for purchase with either Pedaltrain's fitted soft case (featuring a heavy-duty metal zipper and reinforced stress points) or Pedaltrain's professional-grade tour case.

Truetone

CS12

1 SPOT Technology… what does that mean and why should I care? Technically, it’s switching power supply technology, which is very different than what anyone has ever put inside a power brick. Normally, you would find just a big transformer and a handful of small electronic components inside a power brick… old tech that hasn’t changed in decades and has a lot of limitations. We took the same switching power supply technology found in our famous 1 SPOT and scaled it up to make the 1 SPOT Pro models. With much more space to work with, we were able to completely eliminate noise, provide total electrical isolation between outputs, create multiple voltages, and still give you the ability to use it anywhere in the world. A major benefit of using a switching power supply is that it can handle far more current (power being pulled out of it) than any transformer-based power supply. Although we had to put power rating labels on each output to satisfy certification agencies (yes, we actually certified these, unlike most companies), the outputs can generally handle far more than the label shows. For example, you can connect a 300mA pedal to a 200mA output, without causing any problems. With a transformer-based power supply, you can’t get away with that. The important thing is to not exceed the total of all the labels. With a CS7, the output labels add up to 1900mA total. That means the total current draw of all your pedals should be less than 1900mA. That total current rating is roughly double the current load of the most common power brick, for a lot less money.

Pedaltrain Pedalboards

Novo 24 with Soft Case

The Novo series is Pedaltrain’s five-rail pedal board system. Mounting pedals and power supplies has never been easier with Novo's open front design and rail spacing. Novo 24 is perfect for players who use true-bypass switchers or need an extra rail to accommodate a variety of pedal configurations. Novo 24 is available for purchase with either Pedaltrain’s fitted soft case (featuring a heavy-duty metal zipper and reinforced stress points) or Pedaltrain’s professional-grade tour case.

Walrus Audio

Aetos (8-Output) Power Supply 230V

* This is for the 230V (AUS, EUR, UK) Aetos. * The Walrus Audio Aetos is an 8-output, isolated power supply, utilizing an internal custom wound toroidal transformer to provide the highest noise filtering and cleanest power, giving artists the purest sound in their signal chain. The Aetos is housed in a solid die cast enclosure and is 4.7”long x 3.7” wide x 2” height and has 8 total 9VDC outputs, 6 are 100mA and 2 outputs are high current outputs (300mA) for higher current drawing pedals like line 6 DL series modelers, the Boss Twin Series Pedals and many digital modulation pedals on the market. It comes with a detachable 230V AC Power cord. This unit comes with 8 – 2.1mm barrel black power cables and 2 black-to-red (Line 6) power cables. Fits under most pedal boards including Pedaltrain (PT JR and up), Pedal Pad, Blackbird Boards, Creation Music Company, and Holeyboards.

Truetone

1 SPOT Pro CS6

“A lot of people over the years had told us that we should make a power brick. Even some of my own staff urged me to do it, but I didn’t want to for two reasons. First, I knew the 1 SPOT could power just about every pedal out there, so I didn’t see the need. Second, I didn’t want to make just another knock-off of someone else’s power brick. If we were going to make one, we were going to do it our way and have features that nobody else could offer. As pedal designs changed and it became more common for digital pedals to require isolation and for others to need something other than 9Vdc, I finally saw a reason for us to design a power brick.” “It took 3 years and lots of experimentation, but we were finally able to design a 1 SPOT Pro, using our own proprietary technology to give musicians all the features they need for today’s pedalboards. The original 1 SPOT still works great for most musicians, but for those who need more power and versatility, the 1 SPOT Pro fills the need perfectly.” - Bob Weil Introducing the Low-Profile CS6 Following on the tremendous success of the 1 SPOT Pro CS7 and CS12, Truetone presents the most powerful slim-line power supply in its class, the 1 SPOT Pro CS6. Utilizing the energy efficient technology found in all 1 SPOT’s, the CS6 is the first low-profile power brick to be able to put out up to 1600mA of pure, silent power. Just like its bigger brothers in the 1 SPOT Pro line, the CS6 has a variety of DC voltages available to power just about any pedal on the market. Each output is completely isolated, regulated and filtered, eliminating crosstalk and noise. With no big transformer to hinder their performance, proximity noise is not an issue with any 1 SPOT Pro. The low-profile design of the 1 SPOT Pro CS6 allows it to be mounted under flat pedalboards like the Pedaltrain® Nano and Metro series. However, the compact design is also perfect for mounting on top of pedalboards, serving the dual role of a power supply and pedal riser.